Items that need to be done:

--- RIGHT AWAY, FOR BETA 8 ---

* Should we make "Element parent" of types like EntityRef into "Object parent"
  to match types like Comment and Element?

* Examine if it's worth doing an intern() on element and attribute names,
  or if it's too much to pay since SAX is likely doing it already
  http://www.megginson.com/SAX/Java/features.html
  Probably turn off SAX interning and do it ourselves?  Note commentary:
  http://lists.denveronline.net/lists/jdom-interest/2000-October/003289.html
  Regardless, the SAX builder should not assume there's interning!
  (Brad's)

--- AFTER BETA 8 ---

* Figure out how to deal with XMLOutputter writing of special characters like
  &#160.  Should it char escape only chars unprintable in the current
  character set?  Should there be a fancy API for selecting what's escaped?
  Should this be something where you can subclass?
  http://lists.denveronline.net/lists/jdom-interest/2001-February/004521.html
  http://lists.denveronline.net/lists/jdom-interest/2001-April/005644.html
  http://lists.denveronline.net/lists/jdom-interest/2001-April/005649.html
  http://lists.denveronline.net/lists/jdom-interest/2001-April/005669.html
  Brad Huffman has a good proposal.
  (Brad's)

* Make public methods like getContent(Filter).

* Start shipping Xerces 2.0+
  Xerces 2.0.0 bugs found when using DOMBuilder:
   * In cdata.xml we're getting entity callbacks for chars inside CDATA
     sections (bug 6316 in Xerces' Bugzilla)
   * In web.xml we're seeing the comments from the external DTD appear in our
     document (bug 6317 in Xerces' Bugzilla)

* Look at where Namespace may need to be synchronized or made no longer a
  flyweight.  See
  http://lists.denveronline.net/lists/jdom-interest/2000-September/003009.html
  and follow-ups.

* Look into how the factory builder model could support giving the factory
  extra knowledge about the context (line number, element stack, etc), and 
  allow it to report errors or to return a code indicating the element should 
  be ignored.
  (Laurent Bihanic wrote JH a private email about this on Dec 28 2001.)

* Performance optimize.  See following thread for test data.
  http://lists.denveronline.net/lists/jdom-interest/2000-October/003418.html
  http://lists.denveronline.net/lists/jdom-interest/2000-October/003472.html

* Give attributes the "specified" flag like in DOM.  This probably isn't
  receivable from SAXBuilder, but it would be from DOMBuilder and other
  builders.  Then give XMLOutputter the ability to avoid outputting
  "unspecified" attributes.  Some of this may be covered by the attribute type
  support recently added.

--- FOR JDOM 1.0 COMMUNITY REVIEW ---

* Expand class-level Javadocs for inclusion into Frame using the MIF Doclet.

* Note in the docs where necessary our multithreading policy.

* Add in attribute type support to DOM to match what's in SAX.

* Think about if XMLOutputter should have a few specific output states, like
  RAW, PRETTY, COMPRESSED.  See the thread "XMLOutputter inserts extra empty
  lines" for some discussion.

--- FOR JDOM 1.0 ---

* Create "build dist" for distribution
  Use fixcrlf in dist (instead of package as currently done)
  Probably include source with jdom.jar built

* Consider changing XMLOutputter to have more set methods like Enhydra's
  DOMFormatter.  Possible good ones:
   void setPreserveSpace(boolean preserve) 
                       Set the default space-preservation flag.
   void setXmlEncoding(java.lang.String newXmlEncoding) 
                       Set the encoding using the XML encoding name.
   void setXmlEncoding(java.lang.String newJavaEncoding,
                       java.lang.String newXmlEncoding) 
                       Set both the XML and Java encodings.

* Consider adding methods/logic to Verifier for all XML spec. constraints
  (Consider specifically a PCDATA check.  Downside is Elliotte says it 
   causes a 20% performance penalty on building docs.)
  Probably go with sanity checking input unless it adds significant time to
  a SAX build.
  See http://lists.denveronline.net/lists/jdom-interest/2000-August/002088.html
  And http://lists.denveronline.net/lists/jdom-interest/2000-August/002102.html

* Consider changing the Verifier method signatures to throw the
  IllegalXXXException directly instead of returning null on error,
  and let the caller pass the exception through

* Populate jdom-test.  Jools is leading this but Phil Nelson is currently
  doing a lot of work.  Hong Zhang <Hong.Zhang@Sun.COM> is helping with the
  J2EE CTS.

* Make sure we have a plan for supporting obj serialization across current and
  future JDOM versions.  See "serialVersionUID" thread especially 
  Peter V. Gadjokov's remarks at
  http://lists.denveronline.net/lists/jdom-interest/2000-September/subject.html
  It may be OK to worry about fast short-term serialization only.

* Ensure JDOM is appropriately tweaked for subclassing, per the threads
  started by Joe Bowbeer.
  http://www.servlets.com/archive/servlet/ReadMsg?msgId=7601 begins it

* Ensure JDOM is flawless regarding clone semantics, per more threads by
  Joe Bowbeer.
  http://www.servlets.com/archive/servlet/ReadMsg?msgId=7602 begins it

* Joe summarizes his issues at
  http://www.servlets.com/archive/servlet/ReadMsg?msgId=7697

* Make sure that JDOMException is compatible with JDK 1.4 nested exceptions.
  E.g. should getNestedException find 1.4-type nested exceptions? Do both
  1.4-type nested exceptions and JDOMException both try to print child
  stack traces, causing them to be printed twice?

* Clean up Javadocs right before final release.

--- FOR JDOM 1.1 ---

* Consider visitor pattern
  Use cases: count elements, count nodes, translate comments, remove PIs
  Would implement with option to visit depth or breadth first
  Maybe go crazy with pre-order, in-order, and post-order too :-)
  Methods would exist on Document and Element
  FYI, DOM's much overweight Traversal-Range spec is at
    http://www.w3.org/TR/2000/REC-DOM-Level-2-Traversal-Range-20001113/
  Joe Bowbeer has ideas at:
  http://lists.denveronline.net/lists/jdom-interest/2000-November/003610.html
  We may be able to just have doc.iterator() methods
  Also see posts with the subject "How to ease traversal of JDOM tree"

* Add setIgnoringAllWhitespace(boolean) method.

* Add XPath support, most likely integrating Bob McWhirter's package.

* Figure out XPath interface, current best is this:
    List    XPath.getList(Element e, String xpath)  // or Document param
    Comment XPath.getComment(Element e, String xpath)
    Element XPath.getElement(Element e, String xpath)
    ProcIns XPath.getProcIns(Element e, String xpath)
    Entity  XPath.getEntity(Element e, String xpath)
    String  XPath.getText(Element e, String xpath)

* Investigate a way to do in-memory validation.  First step is probably 
  to get an in-memory representation of a DTD as per
  http://xmlhack.com/read.php?item=626
  http://www.wutka.com/dtdparser.html
  http://lists.denveronline.net/lists/jdom-interest/2000-July/001431.html
  http://lists.denveronline.net/lists/jdom-interest/2001-February/004661.html
  Maybe new DTDValidator(dtd).validate(doc);
  Then later new SchemaValidator(schema).validate(doc);
  Could instead do doc.validate(dtd/schema) but then we'd have to dynamically 
  switch between recognizing DTDs and the various schemas.
  The method would probably either throw InvalidDocumentException or might
  take an ErrorHandler-style interface implementation if there are non-fatal
  errors possible.
  It'd also be possible to have a programmatic verifier, that determined for
  example if an orderid="100" entry was valid against a database entry.
  http://dcb.sun.com/practices/devnotebook/xml_msv.jsp
  http://www.sun.com/software/xml/developers/multischema/

* Consider a listener interface so you could listen to doc changes.  
  (Probably after 1.1 honestly; this can be done through manual subclasses
  already.)  Some pertinent messages on this topic:
  http://lists.denveronline.net/lists/jdom-interest/2000-July/001586.html
  http://lists.denveronline.net/lists/jdom-interest/2000-July/001587.html
  http://lists.denveronline.net/lists/jdom-interest/2000-July/001600.html

* Consider a "locator" ability for nodes to remember the line number on which
  they were declared, to help debug semantic errors.
  http://lists.denveronline.net/lists/jdom-interest/2000-October/003422.html

--- UNTIED TO A JDOM VERSION ---

* Consider an XMLOutputter flag or feature to convert characters with well
  known named character entities to their named char entity form instead of
  numeric.

* Determine if DOMBuilder and DOMOutputter should transparently support DOM1.

* Perhaps have builder flags to indicate if CDATA sections should be 
  included and if comment sections should be included.  All seem like 
  reasonable customizations.  The whitespace flag may respect xml:space.  
  It might use an XMLFilter to do the job.

* Create a builder based on Xerces' XNI, which will be more featureful and
  probably faster than the one based on SAX.
  See http://lists.denveronline.net/lists/jdom-interest/2001-July/007362.html
  Some existing SAX limitations which hurt round-tripping:
  * Can't tell if attribute values are included from the DTD, because SAX
    doesn't tell if attributes are standalone/implicit
    (See http://www.saxproject.org/apidoc/org/xml/sax/ext/Attributes2.html)
    (Thought: could use a bit in the type value to save memory)
  * Can't get access to retain the internal dtd subset unless entity 
    expansion is off

* Contribute the samples from Elliotte's XML DevCon talk to the samples/
  directory.  http://metalab.unc.edu/xml/slides/xmlsig/jdom/JDOM.html

* Add a search for jdom.org using Google with site:www.jdom.org, imitating
  http://www.zope.org/SiteIndex/searchForm

* Fix it so check-in messages include diffs.  (jools@jools.org)

* Add ElementLocator to contrib/ directory (from Alfred Lopez)

* Write a guide for contributors.  Short summary:
    Follow Sun's coding guidelines, use 4-space (no tab) indents, no lines
    longer than 80 characters

* Consider a builder for a read-only document.  It could "intern" objects to
  reduce memory consumption.  In fact, interning may be good for String
  objects regardless.

* Consider having the license be clear org.jdom is a protected namespace.

--- WILD IDEAS ---

* Figure out if there's a role for a Node interface.  It sounds easy but all 
  attempts so far have hit obstacles.  Amy Lewis talks about it here:
  http://lists.denveronline.net/lists/jdom-interest/2000-December/004016.html
  There were many follow-on threads.

* Think about somewhat crazy idea of using more inheritance in JDOM to allow
  lightweight but not XML 1.0 complete implementations.  For example Element
  could have a superclass "CommonXMLElement" that supported only what Common 
  XML requires.  Builders could build such elements to be faster and lighter 
  than full elements -- perfect for things like reading config files.  Lots
  of difficulties with this design though.

* Look at Xerces parser features (http://apache.org/xml/features/dom) for
  ideas on things that may be needed.
  http://xml.apache.org/xerces-j/features.html

* Create a JDOM logo.

* Create a Verifier lookup table as an int[256] growable to int[64K] where 
  bits in the returned value indicate that char's ability to be used for a
  task.  So "lookup[(int)'x'] & LETTER_MASK" tells us if it's a letter
  or not.

* Use new Ant regexp task for more efficient JDK 1.1 package renaming.

* Consider elt.getTreeText() which would recursively get the text (in order) 
  for the subtree, effectively ripping out interveneing Elements.  (Suggested
  by Bob to help with XPath.)

* Shouldn't addNamespaceDeclaration() have a name to match
  getAdditionalNamespaces().

* Consider an HTMLBuilder that reads not-necessarily-well-formed HTML and
  produces a JDOM Document.  The approach I'd suggest is to build on top of
  JTidy first.  That gives a working implementation fast, at the cost of a 
  157K Tidy.jar in the distribution.  After that, perhaps someone would lead 
  an effort to change the JTidy code to build a JDOM Document directly, 
  instead of making a DOM Document or XML stream first.  That would be a lot 
  faster, use less memory, and make our dist smaller.  See
  http://www.sourceforge.net/projects/jtidy for Tidy.

* Look at a (contrib?) outputter option using SAX filters per
  http://lists.denveronline.net/lists/jdom-interest/2000-October/003303.html
  http://lists.denveronline.net/lists/jdom-interest/2000-October/003304.html
  http://lists.denveronline.net/lists/jdom-interest/2000-October/003318.html
  http://lists.denveronline.net/lists/jdom-interest/2000-October/003535.html

* Look at event-based parsing as per the following thread:
  http://lists.denveronline.net/lists/jdom-interest/2000-November/003613.html
  and replies.
  Also see posts with the subject "streamdom".

* Considering that local vars are considerably faster that instance vars, test
  if using local vars can speed building.

* Consider a builder.setFeature() pass-through method that allows any 
  features to be set that aren't in the http://xml.org namespace.  Make
  those in http://xml.org not to be touched because either we have specific
  requirements for them to be set one way, or we have the feature exposed
  through a Java method.

* Consider Mike Jennings' proposal of two new methods on Element:
  public String getAttributeValue(String name, String default)
  public String getAttributeValue(String name, Namespace ns, String default)
  http://lists.denveronline.net/lists/jdom-interest/2000-December/004155.html

* Consider using a List of instance data so elements only use what they really
  need (saving attrib list, namespace list)

* Investigate doc.getDescription() to let people add doc descriptions.  It's
  an idea from IBM's parser suggested by andyk.

* Work on creating a deferred builder that parses only what's necessary to
  satisfy the programmer's requests.  See Ayal Spitz' post at
  http://lists.denveronline.net/lists/jdom-interest/2001-April/005685.html

